• M137@lemmy.today
    link
    fedilink
    arrow-up
    1
    ·
    26 minutes ago

    There are servers in this state all around the world and they stop working as soon as anyone tries to fix them so they’re kept just like this.

  • TrackenDaKracken@lemmy.world
    link
    fedilink
    arrow-up
    51
    ·
    8 hours ago

    “They hold 50 pounds each. Four times 50 is 200 pounds, this thing can’t weigh more than that. It’ll be fine.”

    Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I’ve never once lost anything off the roof of my car, and I’ve never had anything come down from a wall like this.

    • DrPop@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      3 hours ago

      Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn’t have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.

    • cannedtuna@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      23
      ·
      7 hours ago

      Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?

        • TrackenDaKracken@lemmy.world
          link
          fedilink
          arrow-up
          3
          ·
          34 minutes ago

          Yeah, yeah. “Americans are, stupid they build houses out of wood and paper.”

          Y’all stopped building houses out of wood centuries ago, after you cut down and burned all your forests. Also, houses built of wood are more common the world over than any other material. I ran Cat6 through my walls to every room in the house with a drill in the attic and a fishtape, I didn’t need to run conduit on the outside of the walls, or tear open the wall and cut grooves in the brick and concrete. It was easy to do. You don’t see beautiful “art” like this in bathrooms and kitchens in the U.S.:

      • MeatPilot@sh.itjust.works
        link
        fedilink
        arrow-up
        8
        ·
        5 hours ago

        I’d like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

        Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.

        • oatscoop@midwest.social
          link
          fedilink
          arrow-up
          5
          ·
          3 hours ago

          Toggle bolts. Not the shitty “spring toggles” – actual toggle bolts like Hilti’s HTB-2, Cobra’s “FlipToggle”, or Toggler’s “SnapToggle”. They’re strong and don’t drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to “flip”, and removing them is more of a chore.

          These things:

        • Imgonnatrythis@sh.itjust.works
          link
          fedilink
          arrow-up
          2
          ·
          2 hours ago

          I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there’s no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.

          These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

          • MeatPilot@sh.itjust.works
            link
            fedilink
            arrow-up
            2
            ·
            1 hour ago

            💯 Those are my go to replacements. If it’s really heavy use toggle and probably try to find a stud to bare most of the weight.

            But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.

            • Prove_your_argument@piefed.social
              link
              fedilink
              English
              arrow-up
              1
              ·
              33 minutes ago

              You’re saying we need a bare stud to make the hole bigger.

              Are you’re sure you’re not the wife? With all the hammering with studs and all.

              I’m sorry I can’t help it.

          • TrackenDaKracken@lemmy.world
            link
            fedilink
            arrow-up
            1
            ·
            52 minutes ago

            I use these because you can take them out and reuse them, and the screw comes out and goes back in.

            Toggle bolts are stronger, but you can’t take the screw all the way out without losing the back piece, that limits their utility somewhat.

          • Sc00ter@lemmy.zip
            link
            fedilink
            arrow-up
            3
            ·
            3 hours ago

            My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall…

            I love em

      • thisbenzingring@lemmy.today
        link
        fedilink
        English
        arrow-up
        8
        ·
        7 hours ago

        That was my first thought, “who thought drywall would hold up a wall mounted rack?!” There’s a reason they put plywood in there

    • JohnnyCanuck@lemmy.ca
      link
      fedilink
      arrow-up
      4
      ·
      5 hours ago

      My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all… Quick tug on a strap, wiggle the object a little, “yup, looks good!”

    • ToastedRavioli@midwest.social
      link
      fedilink
      arrow-up
      1
      ·
      5 hours ago

      People always forget that tolerances like that are specific to certain situations, and that just because it has 50lb tolerance under one kind of load doesnt mean its going to have the same tolerance under a totally different set of stress. Or that 4 of them doesnt mean it can hold 200lbs with any certainty, unless the 200lbs is 4 independent 50lb things

    • [deleted]@piefed.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      7 hours ago

      I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I’d rather it dodn’t shift around and definitely don’t want the wind to suck it up and possibly out on the highway.

      Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed…

    • Onomatopoeia@lemmy.cafe
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      4
      ·
      7 hours ago

      If one will hold it, then 4 is good insurance.

      That’s always been my approach to tying/strapping things down, whether on a roof or trailer.

      I’ve lost about 25% of all the tie down straps I’ve ever owned. They’re on the road, somewhere. But never a load.

      Flex in materials is a bitch.

      Now wall anchors are only for light stuff. You want some weight, then I’m doing lags into studs, even if that means I need to mount some wood across studs first.

  • im_fine_sandy@nord.pub
    link
    fedilink
    English
    arrow-up
    1
    ·
    4 hours ago

    Yes toggles are insufficient for this load, but I think the fixtures here are actually my nemesis: screw in plugs.

    They’re a flawed premise and really only appropriate for hanging a postcard on brand new gyprock.

    The thread is supposed to slice through the gyprock and provide the hold. Gyprock / drywall gets brittle with age so screwing one of those bad boys in just makes it all crumble, even if it doesn’t actually fall apart. The fixture has no strength at all.

    Toggles are fine for a curtain rail. Anything else is a lug in a stud.

    • cannedtuna@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 hour ago

      Personally I only trust good 1/4”-1/2” plywood backing for drywall or some solid redheads for block.

      • im_fine_sandy@nord.pub
        link
        fedilink
        English
        arrow-up
        0
        ·
        12 minutes ago

        Maybe we have different products here. We don’t call it dry wall and ours doesn’t have ply. It’s just “gyprock”. Analogous to plaster but it does have a limited amount of strength: enough for small wall hangings anyway.

        • cannedtuna@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          3 minutes ago

          Well, gypsum or drywall is also known as sheet rock. Plaster is mesh with plaster over it. Plywood is wood board.

          Drywall can hold weight, but it really depends on how you spread that weight. Putting a 1/2” wood backing really helps spread that weight out when fastened to the studs.

          Plaster I don’t trust not to blow out.

  • Ninja876@lemmy.world
    link
    fedilink
    arrow-up
    8
    arrow-down
    1
    ·
    7 hours ago

    Why would you just put the rack on the floor? I would put it on wheels for ease of access but come on bro>?>?>>

      • Ninja876@lemmy.world
        link
        fedilink
        arrow-up
        7
        arrow-down
        1
        ·
        7 hours ago

        No sides open top, its perfectly ventilated unless the room doesn’t have the tonnage to support the heat load. My guess is they thought it looked slick mounted to the wall. And here we are, gravity is a harsh mistress.

        • grue@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          7 hours ago

          I have a similar rack in my house, but even I was smart enough to mount it on plywood.

          • Ninja876@lemmy.world
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            6 hours ago

            Absolutely, I liked using birch laminate plywood to mount these racks. Yes expensive but it wasn’t my money and I’m SUPER lazy. I do it right so I only do it once.

            • grue@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              6 hours ago

              I’m cheap, so I couldn’t justify better than BC (or maybe even CDX?) for the back of a closet, LOL