I haven’t seen one of these in a few days, so I thought I’d toss in one of my own.
It’s meant for via ferrata to reduce the impact of falling on static gear. You loop a short rope through the holes and it absorbs the forces of the fall by friction of the rope slipping through. This is the Kong Kisa.
It’s an energy/impact/shock absorber used when climbing with ropes.
A Kong Kisa?
This is the one. It’s meant for via ferrata to reduce the impact of falling on static gear. You loop a short rope through the holes and it absorbs the forces of the fall by friction of the rope slipping through.
When you have 6 dogs and they all need a walk
Probably could be used that way, but not its designed purpose.
I just read the dog walking theory on the internet, so it’s true.
Me too! Right here
Definitely ambidextrous brass knuckles for characters from The Simpsons.
Is it for abseiling, you feed the rope through the small holes down on one side and then through the big role at the bottom, around the outside back through the big hole then up through the small holes on the other side. The added friction of using this over a “figure 8” would allow you to descend slower.
Possibly used in caving.Very close, it’s a shock absorber for via ferrata.
Ooh, so close.
Looks like a device used for climbing with ropes.
You’re on the right track
Some sort of boat rigging?
Haven’t seen one exactly like this, but looks like a lock out tag out deal.
It is not, but I can see the resemblance
Peice of metal with seven holes in it.
Some sort of pool cue stand?
Like a cue bridge? Nope
You run your shoestrings through it so you don’t have to tie em
There was a scale with it, but it gave a pretty big hint as to its use, so I cut it out.
It’s about 5 or 6 inches long, so you would need some thick laces to use it that way.
Oh, yeah. I was imagining it much smaller
![[Challenge-Solved] An accessory for a niche use](https://lemmings.world/pictrs/image/150970b4-bffb-44a8-9a6a-7d3a28040241.png){kind=link}